Description
4 Channel Multifunctional Controller with Remote Control HomLiCon LCH4HV2
Color Organ Chaser 4Ch 2000W Controller Features
- Three main modes: • Color Organ,Sound Activated Light Show • , • Light Sequencer • , • Lighting •
- Control of 4 channels with groups of the following types of lamps: • Incandescent lamps • , • Halogen lamps • , • Dimmable LED lamps / Dimmable LED strips •
- Control of all settings and functions through the remote control included in the kit.
- Switch with a press of a button between the previously saved custom 10 groups, different levels for all channels or Light Show settings.
- Easy save of 10 custom groups, different levels for all channels or Light Show settings.
- Activation of Light Show controlled by sound from microphone(1), Line-in or unsynchronized.
- Fully automatic Color Organ with digital division of the bandwidth in 4 range: LF 50 – 200 Hz , MLF 200 Hz – 1 kHz , MHF 1 – 7 kHz , HF 7 – 14 kHz.
- Level Meter with / without AGC (Automatic gain control).
- Automatic or manual switching between different programs of Light Show.
- Adjust sensitivity AGC (Automatic gain control) for Color Organ separately for each frequency channel LF, MLF, MHF, HF in 4 levels, saved separately for each audio input.
- Equalize or adjust the light intensity for channels in Light Show.
- Smooth change of light intensity when switching on or off each phase-controlled channel.
- Smooth change of light intensity for all channels to reach the preset levels when selecting one of the ten preset functions.
- Ability to set phase control for each channel or ON/OFF option.
- Ability to choose if the channels are off or a saved function is activated when the supply voltage is applied.
- LED on each one of the channels connected to the microcontroller pins for indication and diagnostics.
- Full optically isolated from mains voltage.
- Optron and TRIAC in the output of each channel.
- The controller can be tested via the onboard LEDs, being safely powered only by 12V.
Applications
- Control groups of lamps 120V or 230V
- Color Organ, Sound Activated Light Show, Light Sequencer, etc.
- Home Automation
——————————————————–
NOTE:
- The device works with HIGH VOLTAGE ! Touching any of the elements of the device when plugged in can be life threatening.
- Outputs do NOT have protection from short circuit or overload. Improper connection will lead to a damaged controller.
- If the power of the load is more than 60% of the maximum allowable per channel, it is necessary to provide air flow around the triacs by means of a small 12V fan (80mm). The case temperature of each triac should not exceed 80 °C.
- The controller can control lamps for 120V or 230V that allow dimming: Incandescent lamps, Halogen lamps, Dimmable LED lamps. Using lamps that do not allow dimming may damage the lamp and controller. Dimmable LED lamps is recommended to be connected via a series resistor that limits the inrush current.
- Line-in audio signal must be from the Line-out of a player, computer (green jack) or smartphone. Do not use a speaker output from amplifier or car audio. Adjust (increase) the level of the player until the channels start to turn on.
——————————————————–
Technical Specifications
| LCH4HV2_2000W | |
|---|---|
| Number of Channels | 4 |
| Mains supply voltage | 90 – 240 VAC |
| Maximum output power total (120V mains voltage) | 2000 W |
| Maximum output power total (230V mains voltage) | 4000W |
| Maximum output power per channel (120V mains voltage) | 500 W |
| Maximum output power per channel (230V mains voltage) | 1000W |
| Maximum output current per channel | 4 A |
| Maximum output current total | 16 A |
| Phase control steps for each channel | 110 |
| Supply voltage optically isolated part | 12 VDC (9 – 12 VDC) |
| Current consumption | 50 mA |
| Number of stored levels and settings | 10 |
| Color Organ bandwidths | LF 50−200Hz , MF 200Hz−7kHz, HF 7−14kHz |
| Line-in nominal level (set standard / high sensitivity) | 0.3V / 0.15V RMS |
| Line-in Maximum level | 1.5V RMS |
| Mic-in range of sound level (with module MACL – optional) | 60-120dB |
| Dimensions LCH4HV2 | 125 / 113 / 35 mm |
| Dimensions Remote | 90 / 40 / 10 mm |
| Ambient temperature | 5 − 40°C |
NOTE:
- If the power of the load is more than 60% of the maximum allowable per channel, it is necessary to provide air flow around the triacs by means of a small 12V fan (80mm). The case temperature of each triac should not exceed 80°C.
——————————————————–
PDF DOWNLOADS
Videos
Video 1 – HomLiCon LCH3HV – Incandescent Lamps
Video 2 – HomLiCon LCH3HV – LED COB
NOTE:
- The videos are from the 3 channel controller LCH3HV, which has similar functionality.
——————————————————–
Package Includes:
- Fully Assembled and Tested Controller: LCH4HV2_2000W OR CH4HV2_1200W (Option 1)
- IR Remote Control 21 key (battery CR2025 not included)
If microphone module MACL – Included (Option 2):
- Microphone Module MACL (assembled and tested)
- Cable 1.25 – 1.25 3p
——————————————————–
Usually ships within 5 business days.
International orders may be subject to duties, taxes, import fees, etc. These fees are not included in the price of the products, or the order total. These fees are the sole responsibility of the buyer.
Orders to the USA are shipped DDP (Delivered Duty Paid). Duty is included in the price.
——————————————————–
—– Lifetime email technical support ——
——————————————————–
Reviews
There are no reviews yet.